AtaraxiaDev/openwrt-auto-extroot
1
0
Fork 0
Code Issues Pull Requests Actions Projects Releases Wiki Activity

Changed to openwrt imagebuilder, back to release instead of snapshots

Browse Source
This commit is contained in:
Martin Friedrich 2018-06-25 10:39:28 +02:00 committed by Attila Lendvai
parent 4a1e765a85
commit e96f2d38cc
2 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
README.md
View File

@ -24,13 +24,13 @@ project because I thought it's useful enough for making it public.
### Building
To build it, issue the following command: `./build.sh architecture variant device-profile`, e.g.:
* `./build.sh ar71xx generic tl-wdr4300-v1`
* `./build.sh ar71xx generic tl-wr1043nd-v2`
Results will be under `build/openwrt-imagebuilder-${release}-${architecture}-${variant}.Linux-x86_64/bin/`.
To see a list of available targets, run `make info` in the ImageBuilder dir.
If you want to change which LEDE version is used, then edit the relevant variable(s) in `build.sh`.
If you want to change which OpenWRT version is used, then edit the relevant variable(s) in `build.sh`.
### Setup stages
@ -47,7 +47,7 @@ space), and then reboot.
#### Stage 2: download and install some packages from the internet
Once it booted into the new extroot, it will continuously attempt to install
some LEDE packages until an internet connection is set up on the router
some OpenWRT packages until an internet connection is set up on the router
(either by using ssh or the web UI (LuCI)).
### Login
@ -59,7 +59,7 @@ By default the root passwd is not set, so the router will start telnet with
no password. If you want to set up a password, then edit the stage 2 script:
[autoprovision-stage2.sh](image-extras/common/root/autoprovision-stage2.sh#L53).
If a password is set, then telnet is disabled by LEDE and SSH will listen
If a password is set, then telnet is disabled by OpenWRT and SSH will listen
using the keys specified in [authorized_keys](image-extras/common/etc/dropbear/authorized_keys).
Once connected, you can read the log with `logread -f`.
@ -77,7 +77,7 @@ but it's easy to extend it.
## Tested with
[LEDE 17.01.1](https://downloads.openwrt.org/snapshots/)
[OpenWRT 17.01.4](https://downloads.openwrt.org/releases/)
on a TP-Link WR-1043nd-v2.
# Troubleshooting
@ -90,19 +90,19 @@ The produced firmware files should be somewhere around ```build/openwrt-imagebui
In short:
* You need a file with the name ```-factory.bin``` or ```-sysupgrade.bin```. The former is to
be used when you first install LEDE, the latter is when you upgrade an already installed
LEDE.
be used when you first install OpenWRT, the latter is when you upgrade an already installed
OpenWRT.
* You must carefully pick the proper firmware file for your **hardware version**! I advise you
to look up the wiki page for your hardware on the [OpenWRT wiki](https://wiki.openwrt.org),
because most of them have a table of the released hardawre versions with comments on their
status (sometimes new hardware revisions are only supported by the latest LEDE, which is
status (sometimes new hardware revisions are only supported by the latest OpenWRT, which is
not released yet).
## Help! The build has finished but there's no firmware file!
If the build doesn't yield a firmware file (```*-factory.bin``` and/or ```*-sysupgrade.bin```):
when there's not enough space in the flash memory of the target device to install everything
then the LEDE ImageBuilder prints a hardly visible error into its flow of output and
then the OpenWRT ImageBuilder prints a hardly visible error into its flow of output and
silently continues. Look into [build.sh](build.sh#L31) and try to remove some packages
that you can live without.

4
build.sh
View File

@ -28,14 +28,14 @@ BUILD=`absolutize $BUILD`
#RELEASE="15.05.1"
RELEASE="17.01.4"
IMGBUILDER_NAME="openwrt-imagebuilder-${TARGET_ARCHITECTURE}-${TARGET_VARIANT}.Linux-x86_64"
IMGBUILDER_NAME="openwrt-imagebuilder-${RELEASE}-${TARGET_ARCHITECTURE}-${TARGET_VARIANT}.Linux-x86_64"
IMGBUILDER_DIR="${BUILD}/${IMGBUILDER_NAME}"
IMGBUILDER_ARCHIVE="${IMGBUILDER_NAME}.tar.xz"
IMGTEMPDIR="${BUILD}/openwrt-build-image-extras"
#https://downloads.lede-project.org/snapshots/targets/ar71xx/generic/lede-imagebuilder-ar71xx-generic.Linux-x86_64.tar.xz
#https://downloads.lede-project.org/snapshots/targets/ar71xx/generic/lede-imagebuilder-ar71xx-generic.Linux-x86_64.tar.xz
IMGBUILDERURL="https://downloads.openwrt.org/snapshots/targets/${TARGET_ARCHITECTURE}/${TARGET_VARIANT}/${IMGBUILDER_ARCHIVE}"
IMGBUILDERURL="https://downloads.openwrt.org/releases/${RELEASE}/targets/${TARGET_ARCHITECTURE}/${TARGET_VARIANT}/${IMGBUILDER_ARCHIVE}"
if [ -z ${TARGET_DEVICE} ]; then
echo "Usage: $0 architecture variant device-profile"