AtaraxiaDev/openwrt-auto-extroot
1
0
Fork 0
Code Issues Pull Requests Actions Projects Releases Wiki Activity

small adjustments after the lede -> openwrt re-rename.

Browse Source
This commit is contained in:
Attila Lendvai 2018-06-26 23:25:24 +02:00
parent a761fb7630
commit 0381c6f40b
2 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
README.md
View File

@ -1,8 +1,8 @@
# What
It's a script to build a customized [OpenWRT](https://openwrt.org/)
firmware image using a Linux x86_64 host (basic familiarity with
[OpenWRT](https://openwrt.org/) is assumed).
It's a script to build a customized OpenWRT firmware image on a Linux x86_64 host
(basic familiarity with [OpenWRT](https://wiki.openwrt.org/doc/howto/user.beginner)
is assumed).
If the generated image is flashed on a device it will try to automatically
set up [extroot](http://wiki.openwrt.org/doc/howto/extroot) on **any
@ -84,8 +84,8 @@ on a TP-Link WR-1043nd-v2.
## Which file should I flash?
You should consult the documentation at [OpenWRT](https://wiki.openwrt.org/doc/howto/user.beginner).
The produced firmware files should be somewhere around ```build/openwrt-imagebuilder-ar71xx-generic.Linux-x86_64/bin/ar71xx```.
You should consult the [OpenWRT documentation](https://wiki.openwrt.org/doc/howto/user.beginner).
The produced firmware files should be somewhere around ```build/openwrt-imagebuilder-17.01.4-ar71xx-generic.Linux-x86_64/bin/ar71xx```.
In short:
@ -95,7 +95,7 @@ In short:
* You must carefully pick the proper firmware file for your **hardware version**! I advise you
to look up the wiki page for your hardware on the [OpenWRT wiki](https://wiki.openwrt.org),
because most of them have a table of the released hardawre versions with comments on their
because most of them have a table of the released hardware versions with comments on their
status (sometimes new hardware revisions are only supported by the latest OpenWRT, which is
not released yet).

2
build.sh
View File

@ -32,7 +32,7 @@ IMGBUILDER_NAME="lede-imagebuilder-${RELEASE}-${TARGET_ARCHITECTURE}-${TARGET_VA
IMGBUILDER_DIR="${BUILD}/${IMGBUILDER_NAME}"
IMGBUILDER_ARCHIVE="${IMGBUILDER_NAME}.tar.xz"
IMGTEMPDIR="${BUILD}/openwrt-build-image-extras"
IMGTEMPDIR="${BUILD}/image-extras"
#https://downloads.lede-project.org/snapshots/targets/ar71xx/generic/lede-imagebuilder-ar71xx-generic.Linux-x86_64.tar.xz
#https://downloads.lede-project.org/snapshots/targets/ar71xx/generic/lede-imagebuilder-ar71xx-generic.Linux-x86_64.tar.xz
IMGBUILDERURL="https://downloads.openwrt.org/releases/${RELEASE}/targets/${TARGET_ARCHITECTURE}/${TARGET_VARIANT}/${IMGBUILDER_ARCHIVE}"